Melexis PTC-04 Programmer for Melexis PTC Devices
Melexis PTC-04 Programmer for Melexis PTC Devices is designed to calibrate the Melexis families of programmable ICs. This programmer is designed to be easily adapted to a standard PC and an application module to allow the calibration of programmable sensor ICs within the operating environment. The PTC-04 programmer contains its programmable power supply and measurement circuitry. Like a standard EEPROM programmer, the PTC-04 adds many features such as 16-bit voltage, current measurement capability, and configuration options that will accommodate users from prototyping directly into production.
An IBM-compatible PC is required (not included) to load software to the programmer and control the programmer's functions. Communication is done through a standard RS-232 null modem cable to a PC's COM port or via USB. The PC requires no custom configuration, allowing the programmer to be used with any PC with a COM port speed of 115.2kbs or a standard USB 1.1 or USB 2.0.
Features
- Universal programming utility
- Fast development
- Fast plug-in for software applications
- Atmega128 Core
- Firmware updatable via RS232 and USB
- FPGA updatable via RS232 and USB
- 3 High current programmable supplies
- 1 High-speed fast
- 16-bit level settings
- 16-bit differential measurements
- Four analog comparators
- Vector generator
- I²C to a daughter board
- Mountable in a 19" rack
Applications
- Experimental tool for Lab and Prototyping
- Production Equipment for Serial Programming
- Programming tool for characterization
Videos
Related Products
Melexis MLX91216 IMC-Hall® Current Sensors
Use open-loop Hall-effect to increase the accuracy of sensitivity and offset over temperature.
Melexis MLX91217 Conventional Hall Current Sensors
Comes with Trim&Form options to facilitate sensor integration in air gap of the ferromagnetic core.
Melexis MLX90371 Triaxis Position Processors
Monolithic sensors are sensitive to the three flux density components applied to the IC.
Melexis MLX90372 Magnetic Field Sensors
SENT or PWM output signal supports various automotive position sensing applications.
Melexis MLX90380 Position Sensors
High-speed dual analog outputs allow sensors to deliver accurate sine or cosine signals.
Melexis MLX90340 Magnetic Position Sensor
Offers a 24V supply voltage rating and 12-bit resolution with 10-bit accuracy.
Melexis MLX90834 MEMS Absolute Pressure Sensors
Miniaturized absolute MEMS pressure sensors based on Triphibian™ technology.
Melexis MLX9083x Triphibian™ Pressure Sensor ICs
Miniaturized MEMS pressure sensors that robustly measure gas and liquid media from 2 to 70 bar.
Development Tools
Melexis PTC04 Development Tools
Ideal for applications such as production equipment for serial programming.